Functional / Special Black Masterbatch
CODE CARRIER
CARBON BLACK 
(%)
SUGGESTED
DOSAGE(%)
APPLICATION
H4 NO CARRIER 58% 0.5-1.5%
For Engineering Material Modifying and Granulation
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
H5 NO CARRIER 60% 0.5-1.5%
For Engineering Material Modifying and Granulation
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
H6 NO CARRIER 60% 1-5%
For Engineering Material Modifying and Granulation
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
H7 NO CARRIER 60% 0.5-1.5%
For Engineering Material Modifying
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
H8 NO CARRIER 70% 0.5-1.5%
For Engineering Material Modifying
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
SY-1 NO CARRIER 55% 0.5-1.5%
For Engineering Material Modifying and Granulation
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
SY-7 NO CARRIER 70% 0.5-1.5%
For Engineering Material Modifying and Granulation
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
SY4 NO CARRIER 50% 1-2%
For Engineering Material Modifying and Granulation
Blue Tone, High Tint Strength.High Brightness,High Temperature Resistance
PA9008 PA6 Organic Pigment 1-2% For PA6 and PA66 Application to Avoid Glassfiber Exposed.
PA9006 PA6 Organic Pigment 1-2% For PA6 and PA67 Application to Avoid Glassfiber Exposed.
PA9005 PA6 33% 1-2%
For PA Injection And Modifying.
High-Gloss and No Spots.
PC-1 PC 33% 1-2%
For PC Injection and Modifying.
 High-Gloss and  No Spots.
PC-2 PC 26% 1-2%
For PC Injection and Modifying. 
 Blue Tone,High-Gloss ,No Spots
PP101 PP 40% 1-2% Special Black Masterbatch for PP Injection.
AS3089 SAN 42% 1-2% For ABS, PS, PC Injection and Modifying
AS3087 SAN 35% 1-2% For ABS, PS, PC Injection and Modifying
AS3086 SAN 35% 1-2% For ABS, PS, PC Injection and Modifying
AS3082 SAN 35% 1-2% For ABS, PS, PC Injection and Modifying
AS3081 SAN 33% 1-2% For ABS, PS, PC Injection and Modifying
PS7019 HIPS 40% 1-2%
For PS Injection and Modifying. 
Special Black Masterbatch for Sheet
High-Gloss and No Spots.
PS7016 HIPS 45% 1-2%
For PS Injection and Modifying. 
Special Black Masterbatch for Sheet
High-Gloss and No Spots.
T3030
COMPOUNDING
CARRIER
50% 1-2% For High-Gloss Injection, Modifying with Good Penetration. 
T3031
COMPOUNDING
CARRIER
40% 1-2% For High-Gloss Injection, Modifying with Good Penetration. 
T3028
COMPOUNDING
CARRIER
27% 1-2% For High-Gloss Injection, Modifying with Good Penetration. 
8008 LLDPE 43% 1-2%
For  High-Gloss Injection, Modifying
FDA Approved.
8081 LLDPE 41% 1-2%
For  High-Gloss Injection, Modifying
FDA Approved.
8082 LLDPE 36% 1-2%
For  High-Gloss Injection, Modifying
FDA Approved.
WN25 LLDPE 28% 1-2%
Special Black Masterbatch for PP Sheet on Car. 
VOC Test Approved.